What happens when I do not get my furnace maintained regularly?

Don’t Skip Your Tune-Up: Why Annual Furnace Maintenance Is Non-Negotiable

How long has it been since your furnace was inspected and cleaned? Do you leave yourself a prompt to remind you to schedule preventative maintenance, or do you just ignore the recommendations from industry professionals? What can you expect from preventative maintenance? What can you expect from ignoring preventative maintenance? 

Your heating and cooling system consists of mechanical, electrical, and chemical components rolled together into one major building system. The closest thing to compare it to in our experience is an internal combustion vehicle, which is composed of electrical and chemical parts. We know what happens to a vehicle if maintenance is ignored; we can expect a short life with lots of problems. The same thing happens to a residential heating and cooling system when maintenance is ignored.

Mechanical Components Need Furnace Maintenance

• The largest mechanical component in a heating system is the blower motor. The motor turns a massive fan that, 1) pulls all air from the home, through the ducts, into an air handler chamber, and 2) pushes the air back into the home. This happens quickly and often—a couple of heating (or cooling) cycles per hour. These fans are usually driven by a belt or chain; either is subject to wear and damage. That means that the blower motor is called into use more than 20,000 times annually under normal circumstances. It is hard to argue against maintaining such a hard-working motor.
• Two smaller motors are also working just as hard in the outdoor condenser unit. One motor turns the condenser fan, and the other is a compressor motor, compressing the refrigerant gas to make the air conditioner and/or heat pump function. The consequences of these motors failing can be air conditioner failure and replacement. Ignoring maintenance can be expensive.

Electrical Components Need Furnace Maintenance

The electrical system that controls the heating and cooling system is quite complex and particularly vulnerable to the buildup of dirt from many sources.

• Sensors detect heat in almost every phase of heating and cooling. The thermostat detects indoor temperature, yes, but other sensors detect temperature variations in the air handler chamber and other sections to ensure efficiency and safety.
• The air filter is designed to clean the air in a home, but it also protects interior sections of the heating and cooling system from dust, dander, pollen, and other airborne contaminants. Letting this filter clog or fail will make the entire system work harder than necessary, putting stress on the electronics in particular and the whole system in general.
• Normal use creates wear on all electrical parts. We are quite familiar with how use affects light bulbs. Even when a bulb does not get bumped or damaged, it still fails. Electrical components wear under normal conditions. A worn part creates stress on surrounding electronics. Maintenance detects these minute stress points, with recommendations for the replacement of minor parts while the problem is still minor. Delaying or ignoring these stresses can lead to larger stresses and more expensive replacements.

Chemical Components Need Furnace Maintenance

• Both air conditioners and heat pump systems use manufactured gas that readily transports heat. Collectively, these gases are called refrigerants. A loss of refrigerant pressure will reduce heat pump efficiency and eventually lead to heat pump system failure.
• Natural gas or propane furnaces ignite and burn gas in a system that must be carefully maintained to function properly and keep the occupants safe. Water vapor from the combustion will create rust. If rust creates an opening in the burner assembly, heat exchanger, or exhaust pipe, it can leak harmful exhaust gas into the home with disastrous consequences.

Maintaining each of these systems is extremely important for continued efficient furnace function.

Is Your Furnace Winter Ready? Schedule Your Preventive Furnace Maintenance Now

Don’t wait until a critical component fails—safeguard your home and health by investing in thorough furnace maintenance. Regular inspections are non-negotiable for detecting the small electrical, mechanical, or chemical stresses that lead to costly breakdowns and safety hazards. Protect your family and extend the life of your unit by contacting us today to schedule your essential preventative furnace maintenance appointment.

Call All Cool AC & Heating now to book your furnace maintenance appointment and prepare for a worry-free winter!